Vitek VTM-PV22I, Manual

Page: 12 / 32

POWER: Turns the monitor on or off.
MUTE: Temporarily silences the sound.
To return the sound: press MUTE again, VOL +, or VOL -.
Press the button to select the desired input source.
VIDEO1/VIDEO2/MEDIA/CAMERA: Displays all the avail-
able input sources. Press the button to select the desired input
source.
COLOR TEMP: Adjusts the color temperature(Kelvin) of the
screen.
RESERVED: For future use only.(Mirror... etc)
(PIP): Controls the PIP as follows:
PIP ON/OFF: Activates/deactivates PIP/PBP mode.
P.SIZE: Selects the size of the sub picture.
P.SWAP: Swaps the main and sub picture.
P.INPUT: Selects an input source for the sub picture.
P.LOCATION: Selects a location for the sub picture.
CYCLE: Cycles the input source:
In PIP or PBP, the subpicture is cycled.
In Full screen, the main picture is cycled.
You can define the cycle time and source in the menu.
MENU/EXIT: Displays or exits the on-screen menu.
KEY LOCK: Locks the buttons to prevent unuthorized opera-
tion of the equipment..
( /VOL- and / VOL+, , ): Controls the cursor in the
on-screen menu, and also adjust the volume up or down.
ENTER:
Confirms (store or enter) your choice in the
on-screen menu.
SCAN: Changes the screen's scan mode (Under, Full, Over, 4:3).
STILL: Freezes the current picture.
CAMERA MENU: Display the Camera menu.
PLAY/PAUSE: Play and pause the slide show picture or video clip.
STOP/EXIT: Stop the slide-show or return to previous page.
Exits the camera menu.
( / / / ): Controls the cursor on the media menu.
* Camera control is optional.