Vitek VTM-PV22I, Manual

Page: 16 / 32

Source: Select VIDEO 1, VIDEO 2, CAMERA, or MEDIA.
Contrast: Adjusts black level of the video screen image (0 to 100).
Brightness: Adjusts white level of the video screen image (0 to 100).
Sharpness:
Adjusts the picture softer or sharper (0 to 15).
Color: Adjusts the color saturation of the video signal (0 to 100).
Tint: Adjusts the range of color: green to red (0 to 100).
3D NR: Reduces the background noise of the video signal (NR ON or OFF).
Language: Select English, German, French, Spanish or Italian for the OSD display.
Key Lock: Select UNLOCK or LOCK. Locks/unlocks the buttons on the front panel.
Scan Mode: Select Under, Full, Over.
PIP: Select SETUP for the picture-in-picture. Then select one of the following:
• PIP Mode: Select PIP OFF, PIP ON, or PBP ON.
• PIP Input: Select VIDEO 1, VIDEO 2, CAMERA, or MEDIA.
• PIP Location: Select the PIP position as T/L (top left), T/R (top right), B/R (bottom right),
or B/L (bottom left).
•
PIP Size:
Select the PIP size as LARGE, NORMAL or SMALL.
• PIP Swap: Select SWAP to interchange Main with PIP by pressing the ENTER button twice.
OSD Setting: Select SETUP for the on-screen display. Then select one of the following:
• H.Position: Adjusts the OSD horizontal position (0 to 100).
• V.Position: Adjusts the OSD vertical position (0 to 100).
• Display Time: Selects off, 5 to 30 secs.
Color Temperature: Select NORMAL, COOL, or USER.
If you select USER, then select from the following calibrations:
• R-Gain: Adjusts gain for red (0 to 100).
• G-Gain: Adjusts gain for green (0 to 100).
• B-Gain: Adjusts gain for blue (0 to 100).
• Reset: Select Restore to return to the original color temperature settings.
Media Control: Sets the media source” enable or disable.
Reset:
Select Restore to return to the default settings.
MENU FIELD DEFINITIONS