Vitek VTC-C770/WDR, Manual

Page: 33 / 48

ENVI Series IP Configuration Manual
________________________________________________________________________________
33
Recording to SD card
A/V data can be recorded to an SD card. An SD card of at least 1GB in size is recommended. Either
EXT3 or FAT32 file system can be used. Linux PC can read any of these file systems. On the other hand,
only memory device with FAT32 file system can be read in Windows PC.
* Recording feature has been added from 102D_001 firmware version.
* Less than 4Mbps of video bit rate is recommended when you record and monitor video at the same
time since it may cause frame loss.
Disk information and Recording Setup
Be sure to restart the system after connecting an SD Card. As it boots, the system reads the status of
the disk and initializes it. Once the initialization of a disk is finished, the status of the disk is shown on
Record page of web-based setup.

Disk Information

The status of a disk can be checked from the Disk Manage menu of ENVI VMS as well.
Refer to the chart for help with checking the status of the disk.
ENVI