Vitek VTC-C770/WDR, Manual

Page: 12 / 48

ENVI Series IP Configuration Manual
________________________________________________________________________________
12
4. Remote Configuration
Using web browser
Remote setting is available by using a web browser. Enter the IP address of the ENVI IP2 Camera and
then a live view screen appears as below. Press the Setup button located in the upper right area of the
monitoring screen to go to the server setup.
For Remote Setting, user should be authorized personnel, higher than manager level.
The configurations are grouped into 10 categories: System , Video , Audio , Network , Serial , Event,
Preset, Record, User and Camera. No configuration changes are applied until the Apply button is
pressed. Leaving the page without pressing Apply will cause any changes to be lost.

Enter IP Address

Press Setup button