Vitek VTC-C770/WDR, Manual

Page: 11 / 48

ENVI Series IP Configuration Manual
________________________________________________________________________________
11

Sensor Input
ENVI IP2 Series cameras support one sensor input. Status of the sensor is displayed in real
time. When the sensor connected to the ENVI IP2 camera is working, the light turns red.

Alarm Output
ENVI IP2 Series cameras support one Alarm output. A number icon indicates status of the
alarm device. To operate the alarm device, press the number icon.

Screen Capture
Capture pictures and store them as BMP or JPEG files.

File record
Recording to an AVI file on a live view page is available. AVI files are generated in the specified
folder or in a specified file name on the PC where web browser is running.
1. Enter the drive and the folder name on the PC and enter
the AVI file name to be used.
2. Press the
“Start”
button to start to record.
3. Press the
“Stop”
button to stop to record.
4. AVI file named
“
File name_IP address_hh_mm_ss
”
will be generated in the specified
folder.
2. Initialization of IP Address
If a system IP address is lost, the system can be reset to the system default IP address using the reset
button in the back of the system.
①
While system is in operation, press the reset button for 5+ seconds.
②
The system will reboot automatically
③
Once the system reboots, the IP address will be set to the system default as below.

IP mode Fixed IP

IP address 192.168.10.100

Subnet mask 255.255.255.0

Gateway 192.168.10.1

Base port 2222

HTTP port 80