background image

 
 
 
 

 

VTC-C594DN 

1/3" Hi-Res Day/Night Color CCD Camera

 

 

INSTRUCTION MANUAL 

 
 

1. General 

This color video camera employs a 1/3” SONY solid-state, charge coupled 
imaging device, and is equipped with a newly developed DSP (Digital Signal 
Processor) for video signal processing to provide high color fidelity and a 
sharp, stable picture. 

2. Features 

1. Accepts IR illumination for surveillance in total darkness. Delivers color 

images in daylight and automatically switches to black-white images at 
night. 

2. 420 lines of horizontal resolution and high quality video utilizing digital 

processing   

3. 0.015lux (@ F0.75) Minimum illumination and signal-to-noise ratio of 48 dB 

is achieved by employing a highly sensitive image sensor with micro lenses 
and low noise circuit design.   

4. High quality picture –A digital signal processor performs digital horizontal 

and vertical aperture enhancement to produce a high quality picture. 

5. A newly developed intelligent wide range Auto Tracing White Balance (ATW) 

that automatically adjusts the tone according to the color temperature of the 
light source. 

6. Smart digital control Auto BLC, the combination of Histogram equalizer and 

Central windows weighting BLC functions ensure for use against any 
unusual lighting conditions. 

7. Advanced Auto Exposure System for both fixed iris and auto iris lenses 

controls the amount of light to ensure optimum video signal. 

8. Internal or Line-lock external sync. 

 

 

 

 

Warning:

 To prevent fire or electric shock hazard, do not expose 

the appliance to rain or moisture 

To prevent electric shock, do not remove screws or covers. 

There are no user serviceable parts inside. 

Contact a qualified service person if necessary. 

 

Summary of Contents for VTC-C594DN









Reviews: