Vitek VTC-C2BTS2, Manual

Page: 9 / 28

Operating Instructions
OSD menu Startup
Press ‘●
’
(OSD menu Joy stick key) down for about 2 seconds to access the
setup menu mode.
MENU V3.xx
1. EXPOSURE
2. LENS
3. FOCUS ASSIST
4. SCENE ENHANCE
5. 3D-NR
6. DAY/NIGHT
7. PICT ADJUST
8. SPECIAL
9. SYSTEM
A. EXIT
NORMAL
MID
AUTO
SAVE&EXIT
DC
Direct Control menu
MAIN DEFAULT DESCRIPTION
LENS Sets Lens types.
DC
FOCUS ASSIST Sets Focus Adjustments.
-
EXPOSURE Sets SHUTTER MODE, BRIGHTNESS, SENS-UP and AGC.
-
SCENE
ENHANCE
NORMAL SCENE ENHANCE provides several ways to enhance the video
in various environments with settings of NORMAL, WDR,
D-WDR, BLC and HLC.
NORMAL – Optimized for the normal indoor and outdoor in good
lighting condition.
WDR – Improves the visibility for bright areas and dark
areas by the double capture of image with LONG and SHORT
exposures. With WDR ON, the frame rate becomes half by the double
capture. WDR level can be selected from LOW, MID and HIGH.
Care should be taken to select this mode because video may lose
its quality in some environments by over compensation.
※
CVBS video signal:Connecting 2nd video to CVBS port disables
WDR function temporarily. It should be considered when installer
adjusts the video with installation monitor via CVBS video signal.
• RET : Returns to the previous menu.
• EXIT : Exits the menu setting without save.
• SAVE&EXIT : Exits the menu setting with save.
9