Vitek VTC-C2BTS2, Manual

Page: 12 / 28

Operating Instructions
DC
MODE
RETURN
DEBLUR
RET
• OUTDOOR:
Optimized for outdoor environment.
• INDOOR:
Optimized for indoor environment.
• DEBLUR: ON enables MOTION DEBLUR to reduce motion blur in certain
indoor environments. Noise or color rolling can increase.
2. LENS
MANUAL
MODE
RETURN
NORMAL
RET
: Select lens mode according to installation. INDOOR or DEBLUR for
indoor installation according to environment.
2-1. DC
(default: DEBLUR for None LED type)
: Horizontal wave or bar may be seen when MANUAL is selected and the camera
is working under florescent or similar lights. Select NORMAL or DEBLUR.
2-2. MANUAL
(default: NORMAL for None LED type)
Select either DC or MANUAL lens.
Lens MUST be set to DC for the best image when DC iris lens is installed
3. FOCUS ASSIST
FOCUS ADJ.
DN DWELL
POP ON FOCUS
RETURN
5s
OFF
RET
Usually cameras are installed in the day time and they often become OUT OF
FOCUS at night time and IN FOCUS again the next day.
This problem can occur with any camera regardless of type or manufacturers.
FOCUSING STATUS
12 13