Vitek VTC-C2BTS2, Manual

Page: 19 / 28

Operating Instructions
• AUTO : The camera will automatically detect the PELCO-C protocol.
• PELCO-C : Camera can detect PELCO-C protocol only.
9-5. LANGUAGE
(default: ENG)
: 8 languages are available for ENGLISH, JAPANESE, GERMAN, FRENCH,
ITALIAN, SPANISH, POLISH and TURKISH.
When changing LANGUAGE, select language and press
☟
to load.
9-4.UTC CONTROL
(default: AUTO)
: Camera can be adjusted through DVR using Up-the-Coax(UTC)
communication with PELCO-C protocol.
Select AUTO, PELCO-C or OFF
9-6. OUTPUT SELECT
(default: TVI)
: Selects the video output TVI or CVBS.
9-7. FACTORY DEFAULT
(default: NO)
: RECALL roads and saves the factory defaults.
A-1. SAVE&EXIT : Save all the setting and exit the main menu
A-2. EXIT : Exit the main menu without save.
A. EXIT
[Note]
- Switching the video format : ▲,▼, ▲,▼,
●
( long push 1~2 sec.)
Do not power off the camera after switching a video format immediately.
It can be cause of crashing a flash memory.
- If set to CVBS video output, UTC Control setting is swiched to OFF
[Note]
AUTO only supports the PELCO-C protocol of verified DVRs. If the
communication does not work with AUTO well, switch to PELCO-C.
19