ENVI Series: VT-IPSN16M
44
11.3.
PPPoE Configuration
PPPoE is used to connect VITEK products to a PPPoE modem provided by the ISP. Since PPPoE
needs verification, ID and a password are necessary to access the network. Type in PPPoE user ID
and password
11.4.
Network Ports
In this configuration, you set up the HTTP port for VITEK cameras to communicate with the Client
PC. HTTP Port is the network port that is used when a Client PC connects to the VITEK camera
Web page. It can be assigned between 80 and 65535.The default value is 80.
Note: If the HTTP port number is changed to a different value than default (80), make
sure the new HTTP port number goes together with the VITEK cameras IP address.
For example, when a VITEK cameras IP address is 192.168.1.100 and the HTTP
port is 8080, you will have to enter http://192.168.1.100:8080 to connect to the
camera.
Summary of Contents for VT-IPSN16M
Page 22: ...ENVI Series VT IPSN16M 21 Click on the Finish button to close the window ...
Page 122: ...ENVI Series VT IPSN16M 121 Group Circulation Start sequencing between groups ...
Page 125: ...ENVI Series VT IPSN16M 124 Enhanced Draw Mode On Off Enhance image for a better reproduction ...
Page 138: ...ENVI Series VT IPSN16M 137 ...
