Vitek VT-H41, Manual

Page: 44 / 76

VT-H41
43
ON: The channel is included in sequencing channels.
OFF: The channel is NOT included in sequence list.
BRIGHTNESS
– Set the brightness of the channel using buttons.
Setting values of the display bar: 0% ~ 100% (The most brightness)
CONTRAST
– Set the contrast of the channel using buttons.
Setting values of the display bar: 0% ~ 100% (The most contrast)
HUE
– Set the hue of the channel using buttons.
Setting values of the display bar: 0% ~ 100%
SATURATION
– Set the saturation of the channel using buttons.
Setting values of the display bar: 0% ~ 100%
6-2. RECORD
Menu item Description
RESOLUTION
Set resolution to either
704x480(NTSC)/704X576(PAL) or 352x240(NTSC)/352X288(PAL).
CHANNEL
Select the channel for applying the following settings.
FRAME RATE
Set the frame rate for the specified channel.
The sum of the frame rate values from each channel cannot exceed
maximum frame rates for a particular recording resolution.
The maximum frame rate: 120/100fps - 352x240(NTSC)/352X288(PAL)
30/25 fps - 704x480(NTSC)/704X576(PAL)
QUALITY
Select the recording quality for the specified channel from
NETWORK, ECONOMY, NORMAL, HIGH, FINE.
RECORDING BY
Assign the recording mode for each channel. Recording modes:
CONTINOUS, MOTION, SENSOR, SCHEDULE, and NONE.
PRE RECORD
Enable/disable pre-event recording. Pre-event recording time is 5
sec and only intra-frames are recorded for pre-event recording.
POST RECORD
Set post event recording time duration for the specified channel
AUDIO
Enable/disable audio for the specified channel
SCHEDULE
Set recording schedule.