Vitek VT-H41 Manual Download

Page: 18 / 76

VT-H41

Indicator

Description

Continuous recording in progress

Manual recording in progress

Sensor alarm recording in progress

Motion alarm recording in progress

Indicates that audio/audios is/are mute, single, or mixed.

Indicates that alarm is detected

Indicates that motion is detected

Indicates that a network client is connected to the DVR.

Indicates that sequencing mode is enabled.

R:A,0..

Indicates that remote controller ID is set.

Indicates the HDD is being recycled

2-3. Time setting

1. Press the SETUP button. Press Up arrow button four times to enter “1111” (Default

password) and press the SEL button. Then the SETUP screen is displayed. The password
change is highly recommended to avoid any unauthorized usage.

2. Press the direction button to select the SYSTEM menu and press the SEL button.

T
h
e
i

If camera is not connected or the connector is not properly connected to video input terminal,

“NO VIDEO” is displayed on the monitor.

Summary of Contents for VT-H41













































































Search results

Summary of Contents for VT-H41

Reviews:

Related manuals for VT-H41

Brands by name

Popular brands

Vitek VT-H41, Manual

Search results

Summary of Contents for VT-H41

Reviews:

Related manuals for VT-H41

Brands by name

Popular brands