Vitek VT-EHL Series, Instruction Manual

Page: 46 / 96

VT-EHL Series
45
SYSTEM SETUP
SYSTEM SETUP
EVENT / SENSOR : BUZZER OUT
Click the BUZZER OUTPUT menu and click each value.
Determine the behavior and actions that will trigger the internal buzzer.
Behavior settings
OPERATION : The internal buzzer can be enabled or disabled.
HDD EVENT : Determines whether a hard drive event sounds the buzzer.
MODE : Can be either TRANSPARENT (the buzzer sounds only when the trigger criteria is present)
or LATCHED (the buzzer sounds for a set period of time after the trigger).
DURATION : In LATCHED mode, the time that the buzzer sounds after it has been triggered.
Action settings
ALARM EVENT : Determines whether alarm inputs will sound the buzzer.
VIDEO LOSS : Determines whether video loss on any of the selected channels will sound the buzzer.
MOTION : Determines whether motion detection on any of the selected channels will sound the buzzer.
Remember to select APPLY and press ENTER to save all settings before exiting these menus