Vitek VT-EHL Series, Instruction Manual

Page: 37 / 96

VT-EHL Series
36
SYSTEM SETUP
SYSTEM SETUP
NETWORK
Click the NETWORK menu to access the DVR’s network settings.
NETWORK : IP SETUP
Click the IP SETUP menu.
DHCP : When enabled, the DVR will obtain an IP address automatically if it is connected to a DHCP server or router.
IP ADDRESS : If DHCP is not being used, the IP address can be manually set.
GATEWAY : If DHCP is not being used, the gateway IP address can be manually set.
SUBNET MASK : If DHCP is not being used, the subnet mask can be manually set.
1ST DNS SERVER : If DHCP is not being used, the first DNS server can be manually set.
2ND DNS SERVER : If DHCP is not being used, the second DNS server can be manually set.
RTSP SERVICE PORT : If the connected Router supports UPnP (Universal plug and play) function,
when you click the AUTO PORT, the port forwarding is automatically setup.
Clicking DELETE PORT will delete the port, and PORT TEST will test the ports.
WEB SERVER PORT : If the connected Router supports UPNP (Universal plug and play), clicking AUTO PORT will
automatically complete the port forwarding. Clicking DELETE PORT will delete the port, and
PORT TEST will test the ports. The Web Server Port is also the port number that the DVR uses to
support remote connection from Internet Explorer or other web browsers.
ALIAS : When you enter the DDNS HOST NAME in DDNS setup, you can see the information here (only when
connected to a UPNP router.
MAX TX SPEED : Specifies the maximum bandwidth that the DVR can use during a remote connection.