6
ENGLISH
•
Close the dustbag compartment lid (12),
slightly press on the lid (12) until the
lock (10) latches.
Note:
–
do not try to close the lid (12) without the
dustbag holder (20) installed, otherwise
you can damage the locking system;
–
always make sure that the dustbag
holder (20) and the dustbag (19 or 24) are
installed properly before closing the dust-
bag compartment lid (12).
CLEANING THE FILTERS
Provide that the inlet filter (21) and the out-
let HEPA filter are always clean, because the
overall performance of the vacuum cleaner
depends on it; clean the filters no less than
3-4 times a year, and more often at severe
obstruction.
Cleaning the inlet filter (21)
•
Switch the vacuum cleaner off and un-
plug it.
•
Open the dustbag compartment lid (12)
pressing on the lid lock (10).
•
Remove the dustbag holder (20) with the
dustbag.
•
Take the inlet filter grid (21) and remove
it pulling upwards to the vacuum cleaner
handle (11).
•
Remove the inlet filter from the grid (21)
and wash it with warm water, dry carefully
and install back to its place.
Notes:
- before installing the inlet filter make
sure that it is clean and dry.
•
Install the dustbag holder (20) with the
dustbag (19 or 24) installed back to its
place.
•
Close the dustbag compartment lid (12).
Cleaning the outlet НЕРА filter
•
Switch the vacuum cleaner off and
unplug it.
•
Remove the outlet filter grid by pressing
the lock (15) and remove the HEPA filter.
•
Wash the HEPA filter under lukewarm water
jet. Do not wash filters in a dishwashing
machine.
•
Dry the HEPA filter. Do not dry the HEPA fil-
ter with a hairdryer.
•
Install the HEPA filter back to its place.
•
Install the outlet filter grid back to its place.
Notes:
–
Before installing the HEPA filter make sure
that it is clean and dry.
–
Do not dry the HEPA filter with a hairdryer.
Vacuum cleaner body
–
Wipe the vacuum cleaner body with a
soft, slightly damp cloth and then wipe
it dry.
–
Do not immerse the body of the vacuum
cleaner, the power cord and the power
plug of the unit into water or other liquids.
Provide that no liquid gets inside the vac-
uum cleaner body.
–
Do not use any solvents or abrasives for
cleaning the vacuum cleaner body and the
accessories.
STORAGE
•
Before taking the vacuum cleaner away
for long term storage, clean its body, the
dustbag (19), the filter (21) and the outlet
HEPA filter.
•
For easy storing use the brush storage
place on the rear wall of the body and
the bottom part of the vacuum cleaner
body.
•
Keep the attachments (22 and 23) in the
attachment compartment. Press on the lid
lock (13) and open the attachment com-
partment lid, select the required attach-
ment (22 or 23).
•
Keep the unit out of reach of children and
people with disabilities.
DELIVERY SET
Vacuum cleaner with the filters
and the cloth dustbag installed – 1 pc.
Flexible hose – 1 pc.
Telescopic extension pipe – 1 pc.
Floor/carpet brush – 1 pc.
Attachments – 2 pcs.
Paper dustbag – 3 pcs.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Rated input power: 1400 W
Maximum power consumption: 2000 W
Suction power: 350 W
IM VT-8129.indd 6
08.10.2018 16:23:01