Vitek VT-7125, Manual Instruction

Page: 3 / 24

3
ENGLISH
COFFEE GRINDER VT-7125
Coffee grinder allows to control the coffee grind-
ing degree for different ways of coffee making.
The finer the grinding, the quicker the coffee is
prepared, but the taste of ready drink may be bit-
ter and harsh. And vice versa: if coffee grade is
too coarse, the ready drink will taste weak and
washy. With proper grinding degree the ready
coffee is strong but has no bitter aftertaste.
DESCRIPTION
1.
Ground coffee container
2.
Container lid
3.
Container lock
4.
Ground coffee scale
5.
Ground coffee amount control knob
6.
Coffee grinder on button « »
7.
Coffee bean container lid
8.
Coffee bean container
9.
Detachable upper millstone
10.
Coffee bean container installation place
11.
Grinding degree control knob
12.
Body
13.
Cord storage
14.
Brush for cleaning
SAFETY MEASURES
Before using the coffee grinder, read these
instructions carefully. Keep this instruction for
further reference.
Use the unit for intended purposes only, as speci-
fied in this manual. Mishandling the unit can lead
to its breakage and cause harm to the user or
damage to his/her property.
• Before plugging the unit in, make sure that
your home mains voltage corresponds to the
voltage specified on unit body.
• Do not use the unit outdoors.
• Use only the accessories supplied with the unit.
•
Before using the coffee grinder for the first
time wash all the removable parts thoroughly.
• Before using the unit make sure that all the
parts are set properly.
•
The coffee grinder is intended only for grind-
ing coffee beans.
• Do not switch the unit on, if the container is
empty.
•
The maximal continuous operation time is
1 grinding cycle; make at least 3-5 minute
breaks between grinding cycles.
• If rotation of the millstone is hindered, unplug
the unit and remove the obstruction that hin-
ders millstone rotation.
•
Set the grinding degree before switching the
coffee grinder on.
• Remove the ground coffee container and
open the lid of the coffee bean container only
after the unit is switched off and millstone
rotation stops completely.
• Never leave the operating unit unattended.
•
Always unplug the unit before cleaning or if
you are not using it.
• Do not use the unit near hot surfaces (for
instance, gas or electric stove, oven).
•
Provide that the power cord does not touch
sharp edges of furniture and hot surfaces.
• Do not touch the power plug with wet hands.
• To avoid risk of electric shock and fire, do
not immerse the unit, the power cord and the
power plug of the unit into water or any other
liquids.
• If the unit is dropped into water:
–
do not touch the water;
–
unplug the unit immediately, and only then
take it out of water;
–
apply to the authorized service center for
testing or repairing the unit.
•
Do not allow children to touch the coffee
grinder body and the power cord during the
unit operation.
•
Do not leave children unattended to prevent
using the unit as a toy.
• During the unit operation and breaks between
operation cycles, place the unit out of reach
of children.
•
The unit is not intended for usage by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience or
knowledge if they are not under supervision of
a person who is responsible for their safety or
if they are not instructed by this person on the
usage of the unit.
•
For children safety reasons do not leave poly-
ethylene bags used as a packaging unat-
tended.
ATTENTION! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
• Check the power cord and plug periodically.
Do not use the coffee grinder if the unit, the
power plug or the power cord is damaged.
•
Do not attempt to repair the unit. Do not disas-
semble the unit by yourself, if any malfunction
is detected or after it was dropped, unplug
the unit and apply to any authorized service
center from the contact address list given in
IM VT-7125.indd 3 23.03.2018 16:55:46