Vitek VT-3427 Manual Instruction Download Page 5

Page: 5 / 36

ENGLISH

•

Immerse the blender attachment (1) into

the bowl with products that you want to

chop/mix.

Note: - You can put the foodstuffs into the

cup (11).

ATTENTION!

While processing products keep the unit ver-

tically.

•

To switch the unit on press and hold the

lock button (4a) « », after that press and

hold the button (4) «ON». Turn the attach-

ment rotation speed control knob (5) to

change the attachment (1) rotation speed.

Notes:

– products should be put into the bowl

before the unit is switched on. The amount

of products to be processed should not

exceed 2/3 of the capacity of the bowl in

which they are processed.

– before starting to chop/mix, we recom-

mend to peel fruit, remove inedible parts,

such as stones, and cut fruit into 2х2 cm

cubes.

•

After you finish using the unit, take the

power plug out of the mains socket and

remove the detachable blender attachment

(1), turning it clockwise.

ATTENTION!

– Do not remove the blender attachment (1)

during operation.

– To avoid damaging the blades, do not pro-

cess too hard products such as cereals,

rice, spices, coffee beans, hard cheeses,

frozen products etc.

– If the foodstuffs are hard to chop with the

blender attachment (1), add some liquid

if possible.

USING THE WHISK ATTACHMENT

(pic. 2)

Use the whisk attachment (10) only for beating

cream and egg whites, making biscuit dough

or for mixing ready desserts.

WARNING: Before installing the whisk (10)

and the gear (9) make sure that the power

plug is not inserted into the mains socket.

•

Insert the whisk attachment (10) into the

whisk gear (9).

•

Install the gear (9) with the whisk attach-

ment (10) to the installation place (2), turn

the gear (9) counterclockwise until bump-

ing, make sure that the gear (9) and the

whisk attachment (10) are fixed properly.

•

Insert the power plug into the mains socket.

•

Immerse the whisk attachment (10) into the
bowl with products.

Note: - You can put the foodstuffs into the
cup (11).

•

To  switch  the  unit  on  press  and  hold  the
lock  button  (4a)  « »,  after  that  press
and  hold  the  button  (4)  «ON».  Turn  the
attachment  rotation  speed  control  knob
(5)  to  change  the  attachment  (10)  rota-
tion speed.

•

After you finish using the unit, take the
power plug out of the mains socket, discon-
nect the whisk gear (9) from the motor unit
(4) by turning the gear (9) clockwise.

•

Remove the whisk (10) from the gear (9).

ATTENTION!
– Do not use the whisk attachment (10) to

knead tight dough.

– Put products into the bowl before switch-

ing the unit on.

USING THE CHOPPER

(pic. 3)

The unit is used to chop meat, cheese, onion,
herbs, garlic, carrots, walnuts, almonds,
prunes, vegetables and fruit.
ATTENTION!
Do not chop very hard products, such as
ice cubes, frozen products, nutmegs, coffee
beans, cereals etc.

Before you start chopping:

– Cut meat, cheese, onions, vegetables or

fruit into pieces approximately 2 x 2 cm in
size.

– Remove stems of herbs, shell nuts.
– Remove bones, sinews and cartilage from

meat.

Chopping

Caution: the blades of the knife (7) are very
sharp! Always hold the knife (7) by the upper
plastic end.

•

Place the chopper bowl (8) on a dry, flat
and steady surface.

•

Set the knife (7) on the axis inside the chop-
per bowl (8).

•