Vitek VT-2535, Manual Instruction

Page: 4 / 20

4
ENGLISH
•
Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, ITS COMMERCIAL USAGE AND USAGE
IN PRODUCTION AREAS AND WORK SPACES IS
PROHIBITED.
USING THE HAIRDRYER
After unit transportation or storage at low
temperature it is necessary to keep it for at
least three hours at room temperature before
switching on.
•
Unpack the unit and remove any advertising
stickers that can prevent unit operation.
• Unwind the power cord completely.
• Before switching the unit on, make sure that
your home mains voltage corresponds to the unit
operating voltage.
•
Insert the power plug into the mains socket.
Switching hair dryer on
Before switching the appliance on make sure power
supply voltage meets operating voltage of the ap-
pliance.
• Insert power cord plug into wall outlet.
• Select operating speed you need using airflow
speed switch (1):
0 = the hairdryer is switched off;
= low speed;
= high speed;
• Select airflow temperature you need using heat-
ing degree switch (2).
= slight heating
= medium heating
= maximal heating
Taking care about your hair
Before drying and setting your hair, wash them with
shampoo, dry with towel to remove excessive mois-
ture and brush for better results.
Fast drying
Set switch (2) into position of maximal heating
(position ), select airflow speed you need using
switch (1) and dry your hair out a little bit. Shake
off excessive moisture by hand or using a brush
and continuously move the hair dryer over your
hair.
Straightening your hair
Set switch (2) into position of maximal heat-
ing (position ), select airflow speed you need
using switch (1) and dry your hair out a little
bit. When your hair are almost dry, install concen-
trating nozzle (4), reduce degree of air heating by
switch (2) and airflow speed by switch (1).
Divide your hair in locks and layers, and start
straightening them from lower layers upwards.
Bruch hair downright using round or flat brush,
simultaneously directing hot air blowing from con-
centrating nozzle on them. Straighten each lock
from root to tip this way. After you have finished
straitening locks of the lower layer, start process-
ing the locks of medium layer, and so on, and fin-
ish with straitening locks of the upper layer.
Natural waving structure of your hair
Set switch (2) into position of slight heating (position
), then set switch (2) into position , hold a lock
between your fingers tightly, turn it to direction of its
natural curliness, then dry the lock out by directing air
jet between the fingers. After getting the shape you
need, press cool shot button (2) and fix each lock.
Rising up and volume
Using hair dryer in any mode of heating/any speed
from slight to maximal, dry out hair roots beginning
from backside of your head.
Styling your hair
Set switches (1,2) into positions of slight heating
and slow speed correspondingly, attach concen-
trating nozzle (4) to provide directed airflow.
Divide your hair into locks and start creating hair-
style you need using round brush for setting hair.
While styling, direct airflow straight on your hair in
any direction you want.
If necessary, direct air jet on each lock for 2-5 seconds
to fix it. Time of setting locks you should determine on
your own taking into account type of your hair.
“Cool shot”
This model is equipped with function of “cool shot”,
which can be used for fixing your hairstyle. Press and
hold “cool shot” button (3) . This option helps to
protect the hairstyle you have created.
PROTECTION AGAINST OVERHEATING
The appliance is equipped with function of protec-
tion against overheating. This function switches
the appliance off if temperature of outgoing air is
higher then admitted. If hair dryer is switched off
during operation, turn it off by setting switch (1) into
position “0”, take power cord plug out of wall outlet,
examine if air inlet or outlet openings are blocked,
leave the appliance for a while for cooling down for
5-10 minutes, then switch it on again. Do not block
air openings while using hair dryer and avoid your
hair getting inside its air inlet opening.
IM VT-2535.indd 4 7/23/19 6:41 PM