7
ENGLISH
•
Unwind the power cord to its full length.
•
Insert the power plug into the mains socket.
•
Before cutting hair, switch the hair clipper on by set-
ting the power switch (4) to «ON». Make sure that the
hair clipper operates normally and the blades (1) move
smoothly. If there is excess oil on the blades (1), switch
the hair clipper off by setting the power switch (4) to
«OFF» and remove the excessive oil with a dry tissue.
•
Constantly check the power cord, prevent it from multi-
ple twisting, regularly switch the unit off and straighten
the power cord.
•
Seat a person so that his/her head is approximately
at your eye level, cover the person’s shoulders with a
towel and set hair with the comb.
Reminder
– Cut off a small amount of hair at a time – if necessary
you can always return to the cut area of hair again for
additional cutting.
– The best haircutting results are reached on dry hair,
not wet.
– Comb the hair with a comb (9) to reveal uneven locks.
– It is better to leave longer hair after cutting for the
first time.
– After learning your clipper better, you will be able to
arrange your hair in any style you need.
Attachment combs
The cut-off hair length depends on the attachment comb:
– attachment comb (5): length of hair left 3 mm;
– attachment comb (6): length of hair left 6 mm;
– attachment comb (7): length of hair left 9 mm;
– attachment comb (8): length of hair left 12 mm.
Install the selected attachment comb on the blades, teeth
up, and press on the ledge in the bottom part of the attach-
ment until locking. Before cutting hair make sure that the
attachment is locked on its installation place. To remove
the attachment comb press the clamp and remove the
attachment.
Step one
Set the 3 mm attachment comb (5) or 6 mm attachment
comb (6).
