6
ENGLISH
– The consumer should check the condition of the cutting
edges of the blades by themselves, as the sharpening
(polishing) of cutting edges is not covered by warranty.
– Reinstall the blades (1), if they have been removed
for cleaning or to be replaced, and tighten the fasten-
ing screws.
Blade shifter (2)
– When you cut hair without using attachments (5, 6, 7,
8), you can shift the blade to adjust the cutting length.
– In the upper shifter (2) position haircut will be the short-
est.
– In the lower shifter (2) position, the cutting length is
approximately the same as when using 3 mm attach-
ment comb (5).
– By changing the position of the shifter (2) while cutting
hair, you can select the necessary cutting length.
– If hair is jammed in the blades (1) while cutting, move the
shifter (2) from the upper position to the lower position
or vice versa several times, this will help to release the
jammed hair without removing the blades (1).
– When the hair clipper is switched on, move the shifter (2)
several times from the upper position to the lower posi-
tion or vice versa, this way you can remove the cut-off
hair from the blades (1).
– If the hair clipper pulls hair while cutting, it means that
the blades (1) became blunt, replace them with new
ones.
Lubricating oil
– Before the first use check whether the blades (1) are
lubricated, and, if necessary, lubricate them with the
oil (11) supplied with the unit. Keep the blades (1) clean
and lubricated.
– Do not use vegetable oil or oil with solvents. Solvents are
subjected to evaporation, and the remaining thick oil can
slow down the upper blade (1) moving speed.
HAIR STYLING INSTRUCTIONS
Before every use of the hair clipper always clean the
blades (1) off hair, dust or any foreign inclusion, lubricate
the blades (1) and check their adjustment.
•
Hair should be clean and dry during hair cutting.
