Vitek VT-2338, Manual Instruction

Page: 6 / 32

6
ENGLISH
air humidifier body (9) and then install the lid
with nozzle (1).
–
Switch the unit on for further operation.
CLEANING AND CARE
WARNING! Always switch the air humidifier off and
unplug it before cleaning.
Hard water causes appearance of mineral scale in the
process chamber (7) and in the water tank (3) that
leads to improper operation of the unit. To avoid it:
–
use filtered, boiled and settled water. If tap water
is hard, it is recommended to mix tap water with
distilled water in proportion 1:1. If tap water is
very hard, mix it with distilled water in proportion
1:2 or use distilled water only.
–
Using of water with high content of minerals may
lead to white deposits on surfaces near the air
humidifier and it is not a sign of malfunction of
the air humidifier.
–
Change water in the water tank (3) twice a week.
–
Thoroughly wash the process chamber (7) and
the water tank (3) with neutral detergent solu-
tion twice a week.
–
To clean the “sprayer”, add 5-10 drops of deter-
gent on it and wait for approximately 10-15 min-
utes. There is a brush (6) in the process
chamber (7), take the brush (6) out and remove
the deposit with it from the “sprayer” surface,
and after that wash the process chamber (7)
with a neutral detergent solution.
–
Rinse the process chamber (7) and the water
tank (3) several times. Wipe the process cham-
ber (7) with a soft cloth. Install the brush (6)
back to its place.
–
Clean the air humidifier body (9) with a soft,
slightly damp cloth, and then wipe it dry.
–
Remove and clean the air inlet grid (9a) and the
foam filter as it becomes dirty.
Notes:
–
do not immerse the air humidifier body into
water or any other liquids.
–
do not use abrasives and solvents for cleaning
the “sprayer”.
–
as a cleaning agent for the “sprayer” you can
use a descaling agent for kettles, strictly follow-
ing the instruction for this substance.
Mineral filter (4)
The mineral filter purifies water of admixtures, heavy
metal ions, bacteria, removes a foreign smell, pre-
vents appearance of white deposits near the oper-
ating air humidifier.
Cleaning the mineral filter
–
It is recommended to wash the mineral filter (4)
once a month, and when using “hard water”,
2-3 times a month.
–
Remove the water tank (3), unscrew the lid (5)
and remove it, remove the mineral filter (4), turn-
ing it counterclockwise.
–
Wash the filter (4) under running water jet.
–
Install the mineral filter (4) on the lid (5) rotating
it clockwise.
STORAGE
–
Pour the water out of the tank and make
sure that the process chamber (7) and the
“sprayer” are dry before taking the unit away for
storage.
–
Do not keep the air humidifier with water inside
the tank (3) or the process chamber (7).
–
Before taking the mineral filter (4) away for stor-
age, clean it and dry; keep the filter (4) in a dark-
ened cool place.
–
Keep the air humidifier in a dry cool place away
from children and disabled persons.
TROUBLESHOOTING
Malfunction Possible causes Troubleshooting
No “mist” The unit is connected improperly Check if the power plug is inserted into the
mains socket.
The unit is off Switch the unit on by pressing the button (11).
Water tank is empty or there
isn’t enough water in the tank. Fill the water tank with enough water.
Foreign smell
appears
during the
operation First use Disconnect the unit from the mains. Remove
the water tank, unscrew the lid (5) and pour
the water out of the water tank, then leave
the water tank in a dry cool place for 12 hours.
IM VT-2338.indd 6 22.11.2018 10:51:50