5
ENGLISH
After you finish straightening the lower locks,
start straightening the locks of the middle layer
and finish with locks of the upper hair layer.
Natural wavy hairstyle
Set the switch (2) to the medium heating posi-
tion «
II
», select the low air supply speed by set-
ting the switch (1) into position «
I
». Grip locks
between fingers tightly, turn them in the direction
of natural curling. Dry your hair, directing the air-
flow between fingers. When the required effect is
achieved, press and hold down the cool shot but-
ton (3) and fix each lock.
Styling
Attach the nozzle (4) to the hairdryer and then set
the switches (1, 2) to the medium heating/speed
position «
II
»/«
I
».
Divide your hair into locks and create a required
hair style by means of a round hair-styling brush.
During hair styling, direct the air flow straight at
your hair. If you want to fix the hairstyle, direct
the cool air flow at each lock for 2-5 seconds.
Styling time is determined individually according
to hair type; you can determine the styling time
by yourself.
Overheating protection
Overheating protection switches the hairdryer
off if the outgoing air is too hot. If the hairdryer
has been switched off during operation, set the
switch (1) to the «
0
» position, unplug the hair-
dryer and make sure that the inlets and outlets
are unblocked. Let the hairdryer cool down for
5-10 minutes and switch it on again. Do not block
the air inlets during unit operation and avoid get-
ting of hair into its air inlet.
Cleaning and care
–
The hairdryer is intended for household usage
only.
–
Set the switch (1) to the «0» position and dis-
connect the hairdryer from the mains.
–
Wipe the unit body with a damp cloth and then
wipe it dry.
–
Turn the air inlet grid (5) counterclockwise and
remove it from the unit body. Clean the grid
with a brush and install the grid to its place.
When installing the grid to its place remem-
ber that the upper lock is a little wider than
other locks.
–
Never immerse the unit into water or other
liquids.
–
Do not use abrasives and solvents to clean
the unit body.
STORAGE
–
Unplug the hairdryer if you are not using it.
–
Let the hairdryer cool down after use, keep
the unit in a dry cool place, out of reach of
children.
–
Never wind the power cord around the hair-
dryer, as this can damage the cord. Handle
the power cord with care, do not pull, twist or
stretch it, especially near the power plug or at
the junction point. Periodically straighten the
cord if it gets twisted.
–
For easy storing there is a hanging loop (7),
you can hang the unit on this loop provided
that no water gets on the unit in this position.
DELIVERY SET
Hairdryer – 1 pc.
Nozzle – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50-60 Hz
Maximal power consumption: 2300 W
The manufacturer preserves the right to change
the specifications of the unit without a prelimi-
nary notification
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
VT-2262.indd 5
14.08.2017 14:45:32
