Vitek VT-2175, Instruction Manual

Page: 5 / 26

5
ENGLISH
Automatic emergency switch-off functions
The unit is equipped with auto switch-off function
in case of overheating or if it is dropped.
• If the unit starts overheating, the automatic
thermal switch will be on.
• In this case immediately set the switch (5) to
the «
0 » position (the unit is switched off).
• Remove the power plug from the mains
socket.
• Make sure that the openings on the body are
not blocked and nothing prevents free air flow.
• Let the unit cool down for approximately
15-20 minutes before switching it on again.
• Plug the unit, switch it on using the switch (5),
set the heating temperature by turning the
thermostat control knob (4).
•
The unit is also equipped with an automatic
switch that switches the unit off when it is
dropped or considerably tilted. When the
unit is back in the vertical position, it will be
switched on.
• If the unit is not switched on, it may mean that
there are damages in the fan heater. In this
case contact an authorized service center to
repair the unit.
CLEANING AND CARE
• Before cleaning disconnect the unit from the
mains and let it cool down.
• Clean the unit regularly to avoid dust accu-
mulation.
• Wipe the outer surface of the unit with a
damp cloth and then wipe the fan heater
dry. Do not use any abrasives or solvents to
remove dirt.
• Do not immerse the fan heater body, the
power cord or the plug into water or any other
liquids. Provide that water does not get into
the fan heater body to avoid electric shock.
• To clean the grids (6) of the unit, use a vac-
uum cleaner with a corresponding attach-
ment.
STORAGE
•
After cleaning put the fan heater to a dark, dry
and cool place away from children for storage.
•
Before using the fan heater next time, it is rec-
ommended to check the unit operability and
integrity of the power cord isolation and the
power cord plug.
•
Keep the unit out of reach of children and dis-
abled persons.
DELIVERY SET
Convection fan heater – 1 pc.
Support plates with wheels – 2 pcs.
Screws for plates fastening – 8 pcs.
Dowels for wall mounting – 2 pcs.
Screws for wall mounting – 2 pcs.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 230 V ~ 50 Hz
Rated input power: 800 W
Heating area: up to 15 sq m
RECYCLING
For environment protection do not throw out the unit
and the batteries (if included), do not discard the
unit and the batteries with usual household waste
after the service life expiration; apply to specialized
centers for further recycling.
The waste generated during the disposal of the unit
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this prod-
uct apply to a local municipal administration, a dis-
posal service or to the shop where you purchased
this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@vitek.ru for
receipt of an updated manual.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage Directive
2014/35/EU.
IM VT-2175.indd 5 6/1/20 4:00 PM