ENGLISH
(23, 24 and 25) on the control panel will start
flashing.
• When the control buttons stop flashing, press
the espresso button (23) twice.
•
Repeat the boiler cleaning procedure with
small intervals till there is no citric acid solu
tion in the tank.
• After finishing of the cleaning process fill the
tank (16) with water and repeat this proce
dure 2-3 tim es to wash o ff the rest of citric
acid or descaling reagent.
Note:
• To remove scale you can use special scale
removers, strictly following the instructions
on their usage.
Cleaning
•
Cleaning the filters (20, 21): you can wash
the filters in a dish washing machine. If the
openings are blocked with the ground cof-
fee remnants, you can clean the filters with a
small brush.
• Wipe the coffee maker body with a soft damp
cloth. Do not use metal brushes or abrasives.
•
Do not immerse the coffee maker body into
water or other liquids.
• Wash the removable parts o f the coffee
maker with warm water and a soft detergent.
Drip trays
•
Remove the lid from the tray, remove the tray
and pour out water, put the tray back to its
place, put the grid on the tray.
•
If necessary, wash the trays and the lids with
water and soft detergent, then rinse and dry.
Troubleshooting
Technical specifications
Failure
Cause
Solution
The unit cannot be
switched on
No voltage in the socket.
The plug is not com pletely inserted
into the socket.
Make sure that the socket is operating.
Check whether the plug is com pletely
inserted into the socket.
Water leaks from the
lower part o f the unit
The water tray is overfilled.
Pour out water from the tray.
Coffee leakage from
the filter holder
Loose connection o f filter and
boiler gasket, ground coffee got
on the edges o f the filter.
Clean the edges o f the filter.
Coffee
has a foreign smell
Wrong process o f scale removal in
the boiler
Improper storage o f coffee
See chapters
«Before using the unit», «Descaling» and
repeat described process several times.
Use fresh ground coffee.
Keep coffee in a dry cool place.
Steam doesn’t froth
the milk
Low tem perature o f the outgoing
steam.
The container is too big or of
improper size.
You used skimmed milk
Froth milk only after the illumination of
control buttons stops flashing.
Use narrow high container for frothed
milk.
Use only whole milk with fat content
4-6%.
All indicators and
control buttons
illumination flash.
The water tank (16) is empty.
Fill the water tank (16) with water.
8
V T -1 5 1 4 _ IM .in d d 8
07.12.2012 9:29:24