Vitek VT-1468 BD, Manual Instruction, Page: 3 / 28

3
ENGLISH
BLENDER VT-1468 BD
The blender VT-1468 BD is included into the
blender set and intended for whisking, mixing,
chopping and combined processing of liquid and
solid products.
DESCRIPTION
1.
Detachable blender attachment
2.
Motor unit
3.
Mode «II» button
4.
Mode «I» button
5.
Speed control knob
6.
Chopper bowl
7.
Chopping knife
8.
Geared lid
9.
Rubberized base
10.
Measuring cup
11.
Whisk attachment
12.
Whisk gear
ATTENTION!
For additional protection it is reasonable
to install a residual current device (RCD) with
nominal operation current not exceeding
30 mA. To install an RCD contact a specialist.
SAFETY MEASURES
Before using the unit, read these instructions
carefully and keep them for future reference.
Use the unit for intended purposes only, as speci-
fied in this manual.
Mishandling the unit can lead to its breakage
and cause harm to the user or damage to his/
her property.
• Before connecting the unit to the mains, make
sure that the voltage specified on the unit cor-
responds to your home mains voltage.
• Never leave the unit connected to the mains
unattended.
•
Always unplug the unit before changing the
attachments.
• Before using the unit, make sure that the
attachments are set properly.
•
Do not connect the motor unit to the mains if
the attachments are not installed.
• It is not allowed to switch the unit on without
attachments and products for processing.
•
Do not use the unit outdoors.
•
Cool down hot products before putting them
into the measuring cup or the chopper bowl.
• Do not place the chopper bowl and the mea-
suring cup into a microwave oven.
•
Use only the attachments supplied.
•
Before using the unit for the first time, thor-
oughly wash all the removable attachments
and containers that will contact food.
•
Place the chopper bowl on a flat stable sur-
face.
• Products should be put into the chopper bowl
before the unit is switched on.
•
Do not overfill the chopper bowl with products
and watch the level of poured liquids.
• The cutting blades of the chopping knife and
of the blender attachment are very sharp and
dangerous. Handle these attachments very
carefully!
• If rotation of the chopping knife is hindered
during the operation of the chopper, unplug
the unit and carefully remove products that
prevent blade rotation.
• Remove products and pour out liquids from
the chopper bowl only after complete stop of
the chopping knife.
•
Do not touch the rotating parts of the unit.
Do not let hair or free hanging clothes get into
the rotation area of the blender attachment
knife or whisk.
•
Unplug the unit every time before cleaning or
when you are not using it.
• Unplug the unit by taking the power plug
directly.
•
Do not pull the power cord and do not twist it.
• Do not put the attachments and the bowls in
a dishwashing machine.
•
Do not use the unit near hot surfaces (such as
gas or electric stove, oven).
• Provide that the power cord does not touch
sharp edges of furniture and hot surfaces.
•
Do not touch the motor unit body, the power
cord and the plug with wet hands.
• Do not use the unit if the power cord or power
plug is damaged.
•
For children safety reasons do not leave poly-
ethylene bags used as a packaging unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
• Do not allow children under 8 years of age
to touch the body of the motor unit, the power cord
or the power plug during operation of the unit.
•
Do not leave children unattended to prevent
using the unit as a toy.
• Close supervision is necessary when children
under 8 years of age or disabled persons are
near the operating unit.
VT-1468.indd 3 08.02.2016 10:23:42