7
ENGLISH
•
Hair should be clean and dry during hair cutting.
•
Unwind the power adapter (14) cord to its full length.
•
Insert the power plug into the mains socket.
•
Before starting a haircut, turn the hair clipper on by
setting the power switch (4) to the «I» position, the
LED illumination on the body will light up in blue.
Make sure that the hair clipper operates normally and
the blades (1) move smoothly. If there is excess oil on
the blades (1), switch the hair clipper off by setting
the power switch (4) to the «0» position and remove
the excessive oil with a dry cloth.
•
Constantly check the power cord, prevent it from
multiple twisting, regularly switch the unit off and
straighten the power cord.
•
Seat a person so that his/her head is approximately
at your eye level, cover the person’s shoulders with a
towel and set hair with the comb.
Reminder
– Cut off a small amount of hair at a time – if necessary
you can always return to the cut area of hair again for
additional cutting.
– The best haircutting results are reached on dry hair,
not wet.
– Comb the hair with a comb (9) to reveal uneven
locks.
– It is better to leave longer hair after cutting for the
first time.
– After learning your clipper better, you will be able to
arrange your hair in any style you need.
Attachment combs
The cut-off hair length depends on the attachment comb:
– attachment comb (5): length of hair left 3 mm;
– attachment comb (6): length of hair left 6 mm;
– attachment comb (7): length of hair left 9 mm;
– attachment comb (8): length of hair left 12 mm.
Install the selected attachment comb on the blades,
teeth up, and press on the ledge in the bottom part of the
attachment until locking. Before cutting hair make sure
that the attachment is locked on its installation place.
To remove the attachment comb press the clamp and
remove the attachment.
