Installation Instructions
Installation Instructions
• Make sure the power is removed before installation.
• After all connections are properly finished, follow the order for applying power.
a) Plug the network cable into RJ-45 Ethernet Port.
If PoE is the only power, there is no need to connect power terminal.
b) When DC12V or AC24V local power is necessary, connect the low voltage
(DC12V or AC24V) first, then plug the AC adapter to AC outlets to avoid an
improper reset from a power spike and damage from the voltage surge with
no load.
When PoE and local dual power are connected at the same time,
local power has priority.
Adjustment of viewing angle
with one-touch 3-Axis bracket
Torque
wrench
Lock/Unlock
Screw
3) Inclination limit
(Horizontal image alignment):
Inclination limited to +/-90° max.
90°
90°
±90°
• on the wall
• on the ceiling
8
9