Installation Instructions
a) Plug the network cable into the RJ-45 Ethernet Port.
If PoE is the only power, there will be no need to connect the Power terminal.
b) When DC12V or AC24V local power is necessary, connect the low voltage
(DC12V or AC24V) first, then plug the AC adapter to AC outlets to avoid an
improper reset from a power spike and damage from the voltage surge with
no load.
When PoE and Local dual power are connected at the same time, Local
power has priority.
Power Supply Connections
This camera can work with either 24VAC or 12VDC, dual voltage power and PoE
(IEEE Std. 802.3af). Primary and secondary grounds are completely isolated
to avoid possible ground loop problems.
Attach the Signal Assignment Sticker
in a visible spot for wiring reference.
~24V/DC12V (RED)
~24V/GND (BLACK)
ALARM-IN (GREEN)
ALARM-OUT (BLUE)
GND (GRAY)
AUDIO-IN (BROWN)
GND (GRAY)
AUDIO-OUT (ORANGE)
Description of the ZOOM&FOCUS
adjustment by Joystick
1) : Zoom In
2)
3) : Focus Near
4)
JOY STICK for
Zoom / Focus control
26
27
