Installation Instructions
Mounting Screw
4x 1.58” (40mm)
1. Position the mounting template at the installation location and drill the ceiling
or wall if needed.
2. Route the cable and connect according to instructions below.
3. Place the camera bracket on the pre-drilled position and attach it using
mounting screws (4x40mm).
4. Set the camera’s viewing angle.
5. Put the sunshield on the camera unit and tighten the sunshield-bolt.
Pan & Tilt adjustments
1) Pan limit:
Pan is limited to +/- 90°.
2) Tilt limit:
Tilt is limited to 0°(2°) min ~ 90° max.
for wall (ceiling) installation respectively
with reference to the wall (ceiling) when
the inclination of camera module is 0°,
that is, the image is aligned horizontally.
90°
90°
• Unlock the screw on the camera bracket using the torque wrench
supplied.
• Set the camera’s viewing angle then lock the screw on the bracket.
7
