4
5
DISK SETTINGS
You can view the disk number, Disk capacity of the NVR and Serial
Number, Read/Write status of the disk. Click “Format” to format the
disk. Click “Next” to continue.
NETWORK CONFIGURATION & ADDING DEVICES
①
Enter IP address, subnet mask, gateway. If using DHCP, please enable
DHCP in both the NVR and the router.
②
Enter HTTP port (the default value is 80) and server port (default is 6036).
③
The internal ethernet port connects all PoE ports in the NVR system. The ports
are available if the internal ethernet port is online; if it is offline, all ports will be
unavailable.
④
Add Camera. Click “Next” to go to the following interface.
RECORD SETTINGS
Two Record Modes: Auto and Manual.
Auto Mode: Select one Auto Mode in the interface as shown below and then
click “Next” to save the settings. Click “Advanced” to define a record mode.
Manual: Set the “Sensor Record”, “Motion Record”, “Analytics Record”
and “Schedule Record” of each camera. Please enable the record as needed.
Click “Next” to continue.
NETWORK ADDRESS TRANSLATION (NAT)
You can enable the NAT function in the interface or set it in the network
configuration after exiting the wizard. You can scan the QR code through the
mobile surveillance APP for iOS or Android to easily view your cameras.
►Web Client Access Through NAT Function
Enter www.autonat2.com in the address bar of your browser and then press enter
to go to the following interface. If it is your first time to access NAT, download
and install the plug-in according to the popup tips. After that, the login box will
be displayed.