Vitec Multimedia MGW Ace User Manual Download Page 50

Page: 50 / 101

MGW Ace Encoder

HEVC Encoding and Streaming Appliance

User Manual, Version 2.1

•

Stream Name

: Enter the stream name that was either set or provided in/by your CDN

account for the RTMP stream.

•

User Name

: Enter the User Name from your CDN account for the RTMP stream.

•

Password

: Enter the password that was set in your CDN account for the RTMP stream. If

no password was set on the CDN server, no password is required.

The Live Preview Page

In the

Live Preview

page you can view the live IP stream withi

n the unit’s management

application.

NOTE

The embedded Live Preview function requires either:

•

VITEC IPTV Player add-on. It is installed automatically by EZ TV or FITIS Video Portals on your computer;

•

VLC Plugin: Visit http://www.videolan.org/vlc/ to install the required plugin;

Due to browser restrictions, Live Preview is only available using Internet Explorer.

To preview a live unicast stream ensure that the computer loading the preview window is using the same IP address as the
IP address set for the unicast stream destination.

In the

Live Preview

page you can set the channel number you wish to watch.

Figure 4-8: The Live Preview page

Summary of Contents for MGW Ace






































































































Search results

Summary of Contents for MGW Ace

Reviews:

Brands by name

Popular brands

Vitec Multimedia MGW Ace, User Manual

Search results

Summary of Contents for MGW Ace

Reviews:

Brands by name

Popular brands