61
Not allowed to use:
• Solvents
• Toilet cleaners
• Sharp brushes and hard objects
• Agents containing chlorine
• Harsh cleaners
Troubleshooting
What if none of the systems are responding?
1. Ensure that the batteries are fully charged.
2. Ensure that the battery is properly connected.
3. Check that the battery switch is turned on.
4. Ensure that the wiring is properly connected.
5. Remove and reinsert the key or turn the drive power off and on again.
What to do if the drive’s electrical power fails?
1. Charge the module battery more often.
2. If the problem remains, take the batteries to the distributor for inspection.
3. Perform a battery load test yourself. Load meters, are available at most auto parts
stores. Follow the instructions that come with the meter.
What if the battery gauge goes down and the engine doesn’t run properly and
has trouble starting when the accelerator lever is pushed in?
1. Fully charge the drive’s battery.
2. The authorized service will carry out a load test.
For models Q1-10 and Q2-16 - the meaning of the status of errors that may appear
on the display:
ERRO 1: motor failure
ERRO 2: steering wheel malfunction
ERRO 3: controller error
ERRO 4: power and brake cut-off
ERRO 5: wyzwalacz podnapięciowy
ERRO 6: connection error. The device is not detected by the output of the controller
ERRO 7: connection error. The controller is not detected by the device output
ATTENTION!
Every electromechanical device requires occasional troubleshooting. Many
of these problems arise through batteries that are not fully charged or due
to wear and tear and their inability to continue holding a charge.
