1.
To begin, put a seal on the bottom thread of the blade base. The
seal should fit snugly and evenly around the thread.
2.
Load the 0.6-litre container according to the recipe. DO NOT blend
hot liquids.
3.
Thread the blade base onto the 0.6-litre container in a clockwise
direction just until tight. DO NOT overtighten or leaking can occur.
4.
With the variable-speed control pointed at the stop symbol
(O), invert the 0.6-litre container so the blade assembly
is on the bottom. Place the container on the motor
base. The interlock tabs on the 0.6-litre container
will lower into the cut-outs in the motor base.
5.
Begin blending by slowly turning the variable-speed
control to the desired variable-speed setting or left
of centre to pulse. Follow the recipe guidelines to
finish blending.
6.
Wait until the blades come to a complete stop before
removing the container from the motor base.
7.
Invert the 0.6-litre container. Unthread the blade base from the
container in an anti-clockwise direction.
8.
Put a seal on the flip-top lid. The seal should fit snugly and evenly
around the bottom thread of the flip-top lid.
9.
Thread the flip-top lid onto the 0.6-litre container in a clockwise direction
until just tight. DO NOT overtighten or leaking can occur.
10.
To open the flip-top lid, hold the container with one hand, press the two tabs
on the lid with the other hand and lift up to release.
This icon corresponds to suggested recipes for the 0.6-litre container
in your cookbook.
SCALE 1.000
Seal
Blade Base
SCALE 1.000
Seal
Flip-top Lid
Ice and Frozen Ingredients
Leafy Greens
Soft Fruits and Veggies
Liquids
(water, juice, yoghurt)
0.6-litre Container
Dry Goods
(grains, seasonings, powders)
B
l e n d i n g
i n
t h e
0.6-
l i t r e
c o n ta i n e r
11
WARNING
DO NOT use your 0.6-litre cup to heat ingredients or to blend hot liquids.
Heated ingredients and liquids may create internal pressure which could cause
the cup to burst and cause injury.
DO NOT continuously use your machine for more than 75 seconds with the
0.6-litre cup.
If a cup becomes warm to the touch or steams or vents, immediately stop
blending ingredients and turn off or unplug the blender. Allow the cup and
ingredients to cool to room temperature before removing the blending
adapter.
Parts will become hot with extended use.
DO NOT touch the drive socket in the motor base or the drive spline in the
adapter.
To avoid damage or personal injury, DO NOT use the cups (including the adapter
or lids) in the microwave.
