V i t a l W e l l E l e c t r o n i c s P t e L t d
w w w . v i t a l - w e l l . c o m
- 9 -
Operation & Network
Access
Registers
Name
Description
R/W
S120
Network ID
Network ID in 2 Bytes.
E.g.: ATS120=192.168 will set the network ID to 192.168
R/W
S121
Device ID
Device ID (Used for Addressed Mode or Addressed Secured
Mode).
R/W
S122
Default
Destination
Device ID
Default Destination Device ID (Used for Addressed Mode or
Addressed Secured Mode). If Destination ID is not provided
in the payload, data will sent to this address.
R/W
S123
Group ID
Group ID (Used only for Transparent Mode or Transparent
Secured Mode).
All and only devices with the same cluster id (together with
the network id) will be linkable.
R/W
S124
Operation
Mode
Operation Mode:
_
’
0
’
Transparent Mode (default)
_
‘
1
’
Transparent Secured Mode
_
‘
2
’
Addressed Mode
_
‘
3
’
Addressed Secured Mode
_
‘
10
’
Testing mode, in this mode, the module will
automatically transmit a pre-defined string once a
second. It can be used to test the linkage range without
a host.
R/W
S125
Number of
Retries
Number of recoveries counts in case of radio conflicts (Used
for Addressed Secured /Transparent Secured Mode).
Default: 3
R/W
S126
Address at
the Header
(TX & RX)
Indicates whether Address at the header. Bit 0 for TX, bit 1
for RX. ( For
addressed mode
only)
Bit 0:
_ '0':
Data will be sent to default address (Register S123);
_ '1': Decode the target address from the header when TX.
Bit 1:
_
’
0
’
:
when receive, forward the payload without address.
_
’
1
’
:
when receive, add the message
’
s source address
at the header together with payload
(default)
