17
EN
Control Panel
7
8
9
10
11
17
16
13
12
15
14
7 TIME +
Increase workout time
8
Timer / programme display:
remaining time in minutes, active
programme
9
Receiver (remote control)
10
Display of speed
:
vibration level
11 SPEED +
Increase vibration level
12 SPEED –
Reduce vibration level
13 AUTO
Selection of a pre-set
programme
14 MANU
Manual programme
15 STOP
Stop programme
16 START
Start programme
17 TIME –
Reduce workout time
Remote Control
18
19
27
30
20
29
23
28
22
21
25
24
26
18
Start programme
19 TIME +
Increase workout time
20 SPEED –
Reduce vibration level
21 M
Manual programme
22
Quick-selection button vibration level 30
23
Quick-selection button vibration level 90
24
Quick-selection button vibration level 60
25
Stop programme
26 AUTO
Selection of a pre-set programme
27 TIME –
Reduce workout time
28 SPEED +
Increase vibration level
29
Standby On / Off
30
Control lamp
Before Initial Use
1. Remove any possible fi lms, stickers or transport protection from the device.
Never
remove the rating plate or any possible warnings.
2. Insert the batteries into the remote control (see “Inserting / Changing Batteries in the
Remote Control”).
Inserting / Changing Batteries in the Remote Control
Before inserting the battery, check whether the contacts in the remote control and on the
battery are clean, and clean them if necessary.
1. Open the battery compartment on the back of the remote control: press the locking
catch on the battery compartment cover and remove it.
2. Remove any used batteries and insert two new batteries (1.5 V; AAA type). Pay
attention to the correct polarity (+ / –).
3. Insert the battery compartment cover and fl ip it shut. You must hear and feel it engage.
Replace the batteries when the power of the remote control starts to wane.