17
EN
Device Overview
1
Device enclosure
2
Right pedal
3
Rear, large foot
4
Front, small foot
5
Adjusting knob (for setting
torque resistance)
6
Left pedal
7
Training computer
1
2
3
4
5
6
7
Functions of the Computer
• The training computer is switched on by turning the pedals or pressing the red select
button (
8)
.
SCAN
then
fl
ashes in the left-hand corner of the display and the following
data is shown in succession:
8
T
Training time in minutes and seconds
D
Distance travelled in km
C
Count of pedal rotations in a training
session
T-C
Total of the pedal rotations in several
training sessions (Notice: Removing
and reinserting the battery will reset the
display to zero.)
CA
approx. number of calories consumed
STOP
The measurement is stopped if the ped-
als are at a standstill for longer than 4
seconds.
• To select a display permanently, press the red button.
• Press the red button several times to switch between the displays.
• Keep the red button pressed down for a few seconds to reset all data, apart from the
T-C
display, to zero.
• If no action takes place for around 4 minutes, the computer switches off automatically.
