9
Troubleshooting
My juicer does not
operate when the
switch is in the
ON position
1. Make sure the power cord is properly secured into the
power source and that the switch is turned to the ‘ON’
position.
2. Check that the Hopper is assembled correctly.
PLEASE NOTE: If the Hopper has not been securely
locked in place with the arrows aligning, the appliance
will not work for safety reasons. This is due to a magnetic
safety strip located inside the hopper which must align
with the matching magnetic strip inside the base.
3. Check the appliance has been assembled according to
the instructions in this manual.
My juicer has
stopped during
operation
1. Reverse / REV to unwind any fibre that is caught
around the Auger.
2. If your juicer has stopped during operation, please
check that the hopper is correctly aligned with the
base. If the alignment shifts during operation the juicer
will stop.
3. Turn your juicer off, reset the hopper and you should
be able to continue.
PLEASE NOTE: The BioChef Atlas Pro Whole Slow Juicer
has an automatic motor cut off safety feature that
will activate if the juicer is overloaded. This has been
designed to help prevent accidental damage and to
help extend the life of the machine.
4. To reset your juicer take off the Hopper lid and remove
any ingredients in the juice bowl.
