Figure 1.2: CueCore1 box contents
1.3
Saving data to memory
This manual will describe how to configure the CueCore1 and program con-
versions, action, etc. The unit’s web-interface is used for editing these kinds
of elements. When changes are made, these changes are directly stored in the
RAM memory of the CueCore1 and the programming will directly influence the
behaviour of the unit. RAM memory is, however, volatile and its content will be
lost through a power cycle. For this reason the CueCore1 will copy any changes
in the RAM memory to its onboard flash memory. Flash memory retains its
data even when not powered. The CueCore1 will load all its data back from the
flash memory upon startup.
This memory copy process is conducted automatically by the CueCore1 and
should not be of any concern of the user. One point of consideration is, how-
ever, that after making a change the unit should be given time to perform the
copy to flash. As a rule of thumb, do not disconnect the power from the device
within 30 seconds from making a programming change.
1.4
Further Help
If, after reading this manual, you have further questions then please consult the
online forum at
http://forum.visualproductions.nl/forum
for more tech-
nical support.
8