Visual Circuits Mantis Media Gateway, User Manual

Page: 40 / 242

Smart Card
26
Loading a Configuration from
the Smart Card
To load a system settings configuration from the Smart Card use
either the WebView or the front panel user interface.
Using WebView
To load a system settings configuration from the Smart Card:
1. Click on
System Settings
from the menu options on the left.
2. Click on the Smart Card tab.
3. Click on the
Load Config
button.
The Mantis loads the configuration data from the Smart Card.
Using the Front Panel
To load the system settings configuration from the Smart Card:
1. Press the
MENU/SELECT
button.
2. Use the
Left
and
Right
arrow buttons to locate the Mantis
Settings.
3. Press the
Down
arrow button to proceed to the Smart Card
options.
4. Use the
Right
arrow button to move to
Load Config
.
5. Press the
MENU/SELECT
button to load and save the new
configuration.
6. Use either the
MENU/SELECT
or
Up
arrow buttons to advance
upward through men until at the top, system status, level.