Visual Circuits Mantis Media Gateway, User Manual

Page: 39 / 242

Smart Card
25
Saving a Configuration to
the Smart Card
To save a system settings configuration to the Smart Card, use
either the WebView or the front panel interface.
Using WebView
To save the current configuration of system settings to the Smart
Card:
1. Click on
System Settings
from the menu options on the left.
2. Click on the Smart Card tab.
3. Click on the
Save Config
button.
The Mantis saves its system settings to the Smart Card.
Using the Front Panel
To save the current configuration of system settings to the Smart
Card:
1. Press the
MENU/SELECT
button.
2. Use the
Left
and
Right
arrow buttons to locate the Mantis
Settings.
3. Press the
Down
arrow button to proceed to the Smart Card
options.
4. Use the
Right
arrow button to move to
Save Config
.
5. Press the
MENU/SELECT
button to save the configuration.
6. Use either the
MENU/SELECT
or
Up
arrow buttons to advance
upward through menu until at the top, system status, level.