manualshive.com logo in svg

Vistor NAS-34, User Manual, Page: 83 / 89

Share
Download
Vistor NAS-34 User Manual Download Page 83

To change or create a RAID disk, 

1.

 

Click the types of mode you want to enter into the RAID Mode Setup page. 

 

 

 

 

 

 

 

 

 

 

2.

 

Select the disk that you wish to change or create.   

3.

 

Click 

Apply Change

 to build RAID.   

Note:

   

y

 HD will be format after clicking 

Apply Change

 button and all contents will be erased!!   

y

 After changing mode, the device will take some time to rebuild your system automatically. The 

required time depends on the mode you select and the capacity of your hard disk drive. (ex. For 
a 100G HDD, it may take 1 hour to rebuild in RAID 1 mode, but take about 5 minutes to rebuild 
in RAID 0 mode) Please wait patiently and do not remove HD when it is still running. Please wait 
patiently and do not remove HD when it is still running. 

 

 

Warning: 

Before changing or creating a RAID disk, please ensure that a hard disk drive has been installed 
in the first bay of the device. The system cannot build RAID if you leave the first bay of the device 
empty. Please insert the hard disk inside!! 
 

 

 

 82

Summary of Contents for NAS-34


























































































Reviews:

No comments