Power Button
To activate the device, press this Power button for two seconds after connecting the device to an
appropriate power outlet with the provided power cord.
To power off, press and hold the button for five seconds.
Backup Button
Press this button to copy files from USB port to the internal HD. A new folder will be created
automatically in the
share
directory. This new folder is named according to the time you press
this button.
Note:
The Backup LED illuminates while data copying. Do not remove this device from USB port
before the
Backup
LED turns off.
LEDs Definition
LED
Status
Steady Blue
Power on
Power
Off Power
off
Amber
Device works normally
Status
Red
Device encounters an error
Steady Green
Valid Connection at 1000 Mbps
Blinking Green
Data transmitting at 1000 Mbps
Steady Amber
Valid Connection at 10/100 Mbps
LAN
Blinking Amber
Data transmitting at 10/100 Mbps
Steady Green
Valid connection on USB I port
USB I
Off
Invalid connection on USBI port
Steady Green
Valid connection on USB II port
USB II
Off
Invalid connection on USBII port
Steady Green
Valid connection on HD
Blinking Green
HD working busily
HD I – HD IV
Off
Valid connection on HD
Steady Red
HD has run out of space
HD FULL
Off
Space available on HDD
Steady Green
Data copying from USB to internal HD
Backup
Off
Data copying finished
USB Port
Connect this port with your USB Storage or printer devices.
Rear Panel
Reset to Default Button
Press and hold the Reset Default Button for four seconds to reset all configurations to factory
default settings.
Note:
y
All configurations that are done by users will be removed from the device.
y
The device also supports restoring factory default settings by software. To get instruction
restoring factory default parameters, see
System > Config > Reset to Factory Default
on page
37.
LAN Port
Connect the port with RJ-45 cable to your switch or IP sharing router.
6