Vista VP960H, Instalation Manual

Page: 23 / 49

17
Select
‘AE SETUP’ and move the
Joystick to the right, the AE setup menu is displayed.
AE SETUP
MODE : MANUAL
DSS LIMIT : OFF
GAIN : MIN
BRIGHT : 024
SHUTTER : 1/50
FLICKERLESS : ---
BACK LIGHT : OFF
WDR : ---
WDR LEVEL : ---
NIGHT SHOT : AUTO
SAVE AND EXIT(ESC TO CANCEL)
MODE
AE1 / AE2 / SHUTTER PRIO / MANUAL
AE1 Auto exposure mode1 (Set for normal surroundings: e.g. indoor)
AE2 Auto exposure mode2 (Set for high brightness surroundings: e.g. outdoor)
SHUTTER PRIO Variable Shutter speed, Auto Gain
MANUAL Variable Shutter speed, Gain
DSS LIMIT OFF / x2 / x4 / x8 / x16 / x32 / x64 / x128 / x256 / x512 (Sense up)
GAIN (AGC) MIN / LOW / MID / HIGH
BRIGHT
10 - 50 in steps of 1
SHUTTER 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/10000, 1/100000
FLICKERLESS OFF / ON
BACK LIGHT OFF / BLC / HLC (Peak White Inversion)
(NOTE: When BLC or HLC is on, WDR will be disabled)
WDR OFF / ON (NOTE: When ON, BACK LIGHT will be disabled)
WDR LEVEL LOW / MIDLOW / MID / MIDHIGH / HIGH
D/N MODE
AUTO / B/W / COLOUR
The D/N mode option removes the IR cut filter of the camera and makes the camera sensitive to infrared
illumination.
AUTO Camera goes into B/W (monochrome) mode at low light
(determined by the GAIN setting)
B/W Permanent monochrome mode
COLOUR Permanent colour mode
These 3 settings can be temporarily overridden for a 60 second period via the day/night command
function from the VKBD4.
NOTE: BLC & HLC is either on or off and applied to the entire image. WDR operates in AE1 mode only. If
‘---‘ is displayed then this function is not available in this AE mode.
5. Set
‘DWELL TIME’ (03 - 99 seconds in steps of 1) - adjust with
(TELE/WIDE)
6. To select the next page of Presets, scroll the page by moving the Joystick to the left or right on the first
and last columns of the menu.
7. Repeat step 2 through 6 for each additional Preset position.
8.
To save changes highlight ‘SAVE AND EXIT’ and move
Joystick right. Joystick left exits without
saving.