Vista VP960H, Instalation Manual

Page: 31 / 49

25
FLICKERLESS OFF / ON
BACK LIGHT OFF / BLC / HLC ( NOTE: When BLC or HLC, WDR will be disabled.)
WDR OFF / ON (NOTE: When ON, BACKLIGHT will be disabled.)
WDR LEVEL LOW / MIDLOW / MID / MIDHIGH / HIGH
NIGHT SHOT AUTO / B/W / COLOUR
NOTE: Values in ( ) are for PAL Camera. The WDR operates in AE1 mode only.
NOTE: When BACKLIGHT set BLC or HLC, focus issues may occur in certain lighting conditions.
The NIGHT SHOT option removes the IR cut filter of the camera and makes the camera sensitive to near
infrared.
AUTO Camera goes in to B&W mode at low light.
B/W B/W mode.
COLOUR Colour mode.
NOTE: AUTO in NIGHT SHOT function is not applied in "MANUAL" mode of AE Control.
3.12.4 DNR CONTROL
Use the Joystick to move the cursor and (Tele/Wide) to adjust. To save changes highlight ‘SAVE AND
EXIT’ and move Joystick right. Joystick left exits without saving.
DNR CONTROL SETUP
2DNR(1) : 003
3DNR(1) : AUTO
2DNR(2) : 003
3DNR(2) : 001
SAVE AND EXIT(ESC TO CANCEL)
2DNR(1), 2DNR(2) Select 2D noise reduction level (OFF / 001~007)
3DNR(1), 3DNR(2) Select 3D noise reduction level (AUTO / 001~028)
NOTE: DNR(1) applied when motor stopped. DNR(2) applied when motor moving.
3.12.5 LINE LOCK CONTROL
Use the Joystick to move the cursor and (Tele/Wide) to adjust. To save changes highlig
ht ‘SAVE AND
EXIT’ and move Joystick right. Joystick left exits without saving.
LINE LOCK SETUP
MODE : INTERNAL
PHASE : 030
SAVE AND EXIT(ESC TO CANCEL)
MODE INTERNAL / EXTERNAL
PHASE Adjusts phase of picture with other cameras in EXTERNAL mode.