Vista Optio OPNVR Series, User Manual

Page: 83 / 139

Parameter Description
Alarm Out
Click Setting to display setting interface.
(not supported by all models)
General Alarm: Enable alarm activation through the alarm
devices connected to the selected output port.
External Alarm: Enable alarm activation through the connected
alarm box.
Latch
Set the length of time the recorder delays turning off the alarm after
the initial event. The value ranges from 0 seconds to 300 seconds,
and the default value is 10 seconds. If you enter 0, there will be no
delay.
Show Message
Select the Show Message check box to enable a pop-up message
in your local device.
Send Email
Select the Send Email check box to enable the system to send an
email notification when an alarm event occurs.
To use this function, make sure the email function is enabled in Main
Menu > NETWORK > EMAIL .
Record Channel
Select the channel(s) that you want to record. The selected channel(s)
starts recording after an alarm event occurs.
The recording for motion detection and auto recording function must
be enabled.
PTZ
Click Setting to display the PTZ interface.
Enable PTZ activation function. For each PTZ camera, select the
preset that you want to be called when an alarm event occurs.
Post Record
Set a length of time for the Device to delay turning off recording after
the alarm is cancelled. The value ranges from 10 seconds to 300
seconds, and the default value is 10 seconds.
Tour Select the Tour check box to enable a tour of the selected channels.
Snapshot
Select the Snapshot check box to take a snapshot of the selected
channel.
To use this function, select Main Menu > CAMERA > ENCODE >
Snapshot , in the Mode list, select Event .
Video Matrix
Select the check box to enable the function. When an alarm event
occurs, the video output port outputs the settings configured in
Main
Menu > DISPLAY > TOUR .
Not all models support this function.
Buzzer Select the check box to activate a buzzer noise at the Device.
Log
Select the check box to enable the Device to record a local alarm
log.