3 1/2 IN
CLOSURE TABS
DC-1834
SECTION VIEW
Mt. BLANC
Mt_Blanc_11x11_Instructions_V1.0
TOLL FREE: 1-877-795-7423
EN
STEP 27
PLACING THE ROOFING PANEL
BEFORE PLACING THE METAL ROOFING, FASTEN THE CLOSURE TABS (DC 1834) ON
THE UNDERSIDE OF THE ROOFING BEHIND THE FIRST ROW OF PUNCHED SCREW
HOLES. AS SHOWN IN
SECTION VIEW
.
PLACE THE 60" SHEETS (DC 1474) ON THE ROOF AS SHOWN. START WITH ONE
SHEET AT THE LEFT SIDE OF THE ROOF. SLIDE THE SHEETING UNDER THE FASCIA
FLASHING AND UNDER THE ROOF EDGE FLASHING FLUSH TO THE OUTSIDE EDGE
AS SHOWN IN
SECTION VIEW
.
PLACE THE ROOFING TIGHT TO THE INSIDE OF THE FASCIA FLASHING AND TO TOP
RIDGE STRAP. PULL THE ROOFING DOWN FROM THE RIDGE ROUGHLY 1/4". THE
ROOFING WILL OVERHANG THE BOTTOM STRAP OF THE ROOF BY 3 1/2", FLUSH WITH
THE FASCIA FLASHING.
ATTACH THE SHEETING TO EACH ROW OF STRAPPING WITH 1" SCREWS THROUGH
THE PRE-PUNCHED HOLES AS SHOWN IN THE
SECTION VIEW
.
1" ROOF SCREWS
60 req
5 - CLOSURE TABS SMALL
DEALER CODE: 1834
I
DO NOT OVERTIGHTEN SCREWS
DC-1474
DC-1474
DC-1474
DC-1474
DC-1474 PARTIAL
