DC-1387
DC-1387
DC-1387
DC-1383
DC-1383
DC-1383
DC-1383
DC-1383
DC-1387
DC-1387
10 1/2 IN
10 1/2 IN
10
1
2
"
2 1/2" ROBERTSON SCREWS
66 req
DETAIL A
NOTE: LOOK FOR MARK ON STRAPPING
B
Mt. BLANC
Mt_Blanc_11x11_Instructions_V1.0
TOLL FREE: 1-877-795-7423
EN
STEP 19
PLACE THE 2x4 STRAPPING PIECES (DC 1383, 1387) AS SHOWN. EACH PIECE
OF STRAPPING WILL OVERHANG THE END RAFTERS BY 10 1/2" AT EACH END.
THE STRAPPING PIECES EACH HAVE A MARK ON ONE FACE TO DETERMINE
THE POSITION TO ALLOW FOR THE 10 1/2" OVERHANG AT THE GABLE END.
PLACE THE STRAPPING SO THE MARK LINES UP WITH OUTSIDE OF THE GABLE
END RAFTERS. THE OTHER END OF THE STRAPPING WILL LINE UP WITH THE
CENTRE OF ONE OF THE MID RAFTERS.
ATTACH EACH PIECE OF STRAPPING WITH TWO 2 1/2" SCREWS AT EACH POINT
THE STRAPPING CROSSES WITH THE RAFTERS.
PLACE THE STRAPPING USING THE MARKS ON THE TOP OF THE RAFTERS TO
SPACE THEM OUT PROPERLY. ALIGN THE TOP ROW OF STRAPPING ON THE
LONG SIDE OF THE ROOF WITH THE PEAK WHERE THE TWO RAFTERS MEET A
THE CENTRE OF THE ROOF. THE PLACEMENT OF EACH ROW OF STRAPPING IS
SHOWN IN
DETAIL A
BELOW.
