DC-1671
DC-1671
DC-1671
DC-1671
DC-1671
DC-1671
DC-1671
DC-1671
DC-1671
DC-1671
2 1/2" ROBERTSON SCREWS
22 req
DETAIL 1
DC-1671
B
Mt. BLANC
Mt_Blanc_11x11_Instructions_V1.0
TOLL FREE: 1-877-795-7423
EN
STEP 23
PLACE THE RAFTER TAIL PIECES (DC 1671) AS SHOWN BELOW. PLACE
ONE TOP RAFTER TAIL PIECE (DC 1671) TIGHT AGAINST THE INSIDE OF
THE WALL FASCIA. USING THE
RAFTER TAIL SPACER BLOCK (DC 1603)
PLACE FOUR RAFTER TAIL PIECES ALONG THE LENGTH OF THE ROOF.
SECURE EACH RAFTER TAIL WITH TWO SCREWS FROM THE INSIDE OF
THE RIDGE BOARD AND TWO SCREWS DOWN THROUGH THE TOP
STRAPPING PIECE AS SHOWN IN
DETAIL 1
. SECURE THE OUTSIDE
PIECES WITH AN ADDITIONAL 2 1/2" SCREW THROUGH THE FACE OF THE
WALL FASCIA EXTENSION, MAKE SURE THAT THESE TAILS ARE FLUSH
AT BOTH THE ENDS AND TOPS OF THE WALL FASCIA PIECES.
DC-1603
SPACER BLOCK 28 1/2" LONG
