background image

 

14

 

 

WARRANTY 

 

MC Appliance Corporation

 warrants each new Beer Keg Cooler to be free from defects in 

material and workmanship and agrees to remedy any such defect or to furnish a new part(s) 
(at the company’s option) for any part(s) of the unit that has failed during the warranty 
period. Parts and labor expenses are covered on this unit for a period of one year from the 
date of purchase.  In addition, 

MC Appliance Corporation

 warrants the compressor (part 

only) to be free from defects in material and workmanship for a period of 5 years. The 
consumer is responsible for all labor and transportation expenses related to the diagnosis 
and replacement of the compressor after the initial one-year warranty expires. 

A copy of the 

dated sales receipt / invoice is required to receive warranty

 

service or a refund. 

 
This warranty covers appliances in use within the continental United States, Puerto 
Rico and Hawaii. The warranty does not cover the following: 

 

ƒ

  Damages due to shipping damage or improper installation. 

ƒ

  Damages due to misuse or abuse. 

ƒ

  Content losses due to failure of the unit. 

ƒ

  Inside components such as door panels, door shelves, racks, light bulbs, etc. 

ƒ

  Punctures to the evaporator system due to improper defrosting of the unit. 

ƒ

  Repairs performed by unauthorized service agents. 

ƒ

  Service calls that do not involve defects in material and workmanship such as 

instruction on proper use of the product, door reversal or improper installation. 

ƒ

  Replacement or resetting of house fuses or circuit breakers. 

ƒ

  Failure of this product if used for other than for its intended purpose. 

ƒ

  Disposal costs for any failed unit not returned to our factory. 

ƒ

  Any delivery costs incurred as the result of a unit that fails to perform as specified. 

ƒ

  Expenses for travel and transportation for product serviced in remote areas. 

ƒ

  Removal and installation of appliance if it is installed in an inaccessible location or 

not installed in accordance with published installation instructions. 

 

This warranty is in lieu of all warranties expressed or implied and no representative or 
person is authorized to assume for us any other liability in connection with the sale of 
this product. Under no circumstances is the consumer permitted to return this unit to 
the factory without prior written consent from

 

MC Appliance Corporation.

 

 
 

Model              

Parts   

 Labor    

Compressor    

Type of Service 

 

 

 

 

 

 

 

(Part Only) 

 

MCKC490S

  

            One-Year 

 One-Year 

 Five Years 

 

 In-Home 

 
 
For Service or Assistance please call 

888 775-0202

. Or visit us on the web at 

www.mcappliance.com

 to request warranty service or order parts. 

 

Summary of Contents for Vissani MCKC490S















Reviews: