13
Please contact
or
1-888-449-9197
between 8:30 am - 5 pm, EST, Monday - Friday
for further assistance.
ENGLISH
Maintenance
FILTERS
Baffle filters should be cleaned regularly using a warm, mild
dish-washing detergent solution. Damaged baffle filters should be
replaced .
Charcoal filters should only be used in indoor-vented (recirculating)
ventilation systems and should be replaced periodically, typically
every 6 to 9 months, depending on frequency of use.
-
T
urn off the range hood and disconnect the power .
- While holding the baffle filter, press the lock knob and
remove the filter. Clean the filter and ensure the baffle filter
is dry before reinstallation .
- Charcoal filters are installed directly onto the motor
housing. Slide the filter onto the lock feature in the center
for the grille and rotate it until it locks into posion .
Fig .13
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance.
Touching circuitry inside the range hood while it is
energized will result in death or serious injury .
WARNING:
Failure to replace worn out or damaged filters
will increase the risk of fire.
Fig. 14
LIGHT BULBS
WARNING:
Light bulbs can become hot when turned on .
Do not touch bulbs until they are switched off and cooled .
Touching hot bulbs could cause serious burns .
When light bulbs burn out, replace them with factory approved
replacement bulbs available from our customer service team .
-
Turn off the range hood, disconnect it from its power source,
and ensure that the lights are cool .
- Remove the filters and gently press on the bulbs from
inside the range hood to remove them . Disconnect the bulb
connector .
-
Connect a new replacement bulb to the bulb connector and
and gently press the bulb back into the the bulb opening until
it locks into place .
- Reinstall the filters and restore the power to the range hood.
Fig. 15
